Deutscher Alpenverein - Kletterverband Bayern
Verlängertes Rückgaberecht bis 14.01.2017 für entspannte Weihnachtseinkäufe!
X
50 x Impact Anchor/ Drop-in Anchor Galvanised SAK M10 incl. TECHNICAL APPROVAL
Article-No.:1619
35,99
incl. statutory VAT zzgl.
shippingcosts
Availability: Delivery time ca 1 working day
Delivery time ca 1 working day
add to cart
Wishlist
Watchlist

More productimages
Description

50 x Impact Anchor/ Drop-in Anchor Galvanised SAK M10 incl. TECHNICAL APPROVAL

  • Approved for anchoring in non-cracked concrete
  • Quick and economic fitting

Application:

The drop-in anchor is perfect for fixing climbing holds to non-cracked concrete.

Properties:

  • Drop-in anchors suit all screws and thread rods with metric thread
  • The low embedment depth reduces the drilling time and provides economic fixing
  • After driving repeated removing or fixing is possible as the anchor itself remains in the drill hole
  • Electrolytically galvanised
  • Approval no. ETA-04/0011 for anchoring in non-cracked concrete
  • Approval no. Z-21.1-1745 for anchoring in lightweight ceiling linings
  • Fire prevention checked

Principle of Operation:

After setting into the drill hole, the nose of the drop-in anchor is forced apart with a setting tool. Then the climbing hold is screwed into the inside thread.

Instruction for Use:

  • Drill a hole
  • Clean the drill hole with a brush and/or a blowout shot
  • Insert the drop-in anchor to the effective anchoring depth. This is reached when the expanding sleeve doesn\'t protrude beyond the concrete surface
  • By hitting the cone via the setting tool, the anchor is fixed. It is duly set when the setting tool is in contact with the sleeve
  • Screw the climbing hold into the thread.(Don\'t use more torque than allowed according to the table of technical data)

Technical Data:

  M 10
Drilling depth [mm] (achoring depth, embedment depth) 44
Drill hole diameter [mm] 12
Recommended resistance per anchor in non-cracked concrete [kN] incl. partial safety factor 3.0
Torque when anchoring 15
Thread diameter [mm] 10
Customers who were interested in 50 x Impact Anchor/ Drop-in Anchor Galvanised SAK M10 incl. TECHNICAL APPROVAL bought the following products:
12 Climbing Holds Fun for Children and Adults
12 Climbing Holds Fun for Children and Adults
( Artikel-Nr.: 2000 )
Perfect extension set for an existing wall
Delivery time ca 1 working day Delivery time ca 1 working day

44,95

incl. statutory VAT plus
shipping costs
Colour
add to cart
1 Cylinder Head Screw DIN 912 M10 x 30 mm Zinc-Plated
1 Cylinder Head Screw DIN 912 M10 x 30 mm Zinc-Plated
( Artikel-Nr.: 1450 )
Also available in other packing units with 50 and 100 pieces
Delivery time ca 1 working day Delivery time ca 1 working day

0,35

incl. statutory VAT plus
shipping costs
add to cart
1 x Impact Anchor/ Drop-in Anchor Galvanised SAK M10 incl. TECHNICAL APPROVAL
1 x Impact Anchor/ Drop-in Anchor Galvanised SAK M10 incl. TECHNICAL APPROVAL
( Artikel-Nr.: 1608 )
Delivery time ca 1 working day Delivery time ca 1 working day

0,79

incl. statutory VAT plus
shipping costs
add to cart
1 zinc-plated T-nut M 10
1 zinc-plated T-nut M 10
( Artikel-Nr.: 1312 )
Delivery time ca 1 working day Delivery time ca 1 working day

0,17

incl. statutory VAT plus
shipping costs
add to cart